HEPA Filter H13 305 x 610 x 150 mm 12" 24" 6" Aluminium Frame

Product Video : YouTube ZEFA

Buy on Shopee : ZefaTech
Buy on Tokopedia : ZefaTech

Technical Specifications

• Product Code : HFN013
• Filtration Class : H13 (Efficiency ≥99.95% @ 0.3 μm / MPPS, EN 1822)
• Dimensions : 305 x 610 x 150 mm
• Filter Media : High-quality Microglass Fiber
• Frame : Extruded Anodized Aluminium
• Separator : Hotmelt
• Gasket : Half Round Endless Polyurethane (Down Stream)
• Protection Grids : Painted Aluminium on both sides
• Final Pressure Drop : 600 Pa
• Maximum Operating Temperature : 80°C
• Dimensional Tolerance : Safe up to ±10 mm difference with housing

Key Advantages

• High H13 efficiency – captures ≥99.95% of particles at 0.3 microns
• 150 mm deep pleat – significantly higher dust-holding capacity and longer service life
• Compact 305 x 610 mm size – perfect for space-limited systems, modular FFU, or small-to-medium applications
• Downstream endless polyurethane gasket – reliable, leak-free sealing
• Anodized aluminium frame – lightweight, corrosion-resistant, and durable
• Dual-sided painted aluminium grids – maximum media protection
• ±10 mm tolerance – flexible installation in various housings

Applications

• Air conditioning systems in hospitals, operating theaters, isolation rooms, laboratories, museums
• Industrial processes in pharmaceutical plants, food & beverage, microelectronics
• Medium-class cleanrooms, medical facilities, and sensitive production areas

The HEPA Filter H13 MIKROPOR HFN013 delivers excellent air filtration with ≥99.95% efficiency at 0.3 microns (EN 1822 certified). It effectively removes ultra-fine dust, bacteria, viruses, pollen, and microscopic contaminants. With compact dimensions 305 x 610 x 150 mm and 150 mm deep pleat design, this model offers significantly higher dust-holding capacity and longer service life compared to standard-depth filters, making it ideal for applications requiring high purity in limited space.

Featuring premium microglass fiber media, anodized aluminium frame, downstream endless polyurethane gasket, and dual-sided protection grids, the HFN013 ensures stable performance, perfect sealing, and long-term reliability in critical environments such as cleanrooms, operating theaters, pharmaceutical labs, and microelectronics production.

Filtration Stage Sequence

1. Pre-filter (G4) – removes large dust and coarse particles
2. Medium/Fine filter (F7–F9) – captures medium to fine particles
3. HEPA H13 – final stage for maximum cleanliness

Installation Instructions

1. Ensure housing/plenum is clean before installation.
2. Check knife-edge or sealing surface for cleanliness and damage.
3. Remove old filter carefully (use PPE).
4. Install new filter: align downstream gasket side, lower gently until fully seated.
5. Confirm level and proper alignment.
6. Perform DOP/PAO leak test after installation.

When to Replace the HEPA Filter

• Final pressure drop reaches or exceeds 600 Pa
• Significant rise in differential pressure → higher fan load and energy use
• Leak test fails (mandatory every 6–12 months per ISO/GMP)
• Typical service life 1–3 years (depending on dust load and pre-filter quality)

Chat with us for full datasheet, special pricing, or bulk orders. We serve customers throughout Indonesia!