AQUARIGHT KP35AC Inorganic Coagulant for Water and Wastewater Purification

AQUARIGHT KP 35 AC
AQUARIGHT KP35AC is a liquid coagulant chemical based on Polyaluminium Chloride (PAC), designed to clarify water by agglomerating fine particles so they can settle or be removed.

SPECIFICATION

• Appearance: Yellowish

• pH: 2.0 – 4.0

• Specific gravity: 1.20 – 1.25

• Solubility: Soluble in water

MAIN FUNCTIONS

1. Used to clarify turbid water

2. Suitable for industrial wastewater and raw water with high or fluctuating turbidity

3. Does not cause water to become more turbid even when overdosed (unlike common flocculants)

DOSAGE & APPLICATION

1. General dosage: 5–10 ppm (5–10 mg per liter of water)

2. Dosage depends on water condition; jar test is recommended for optimal results

3. Can be applied directly without dilution, simply mix into water with stirring

ADVANTAGES

1. Ready-to-use in liquid form

2. Safe to use in higher doses without increasing turbidity

3. Suitable for various water pH levels

4. Effective for: Industrial wastewater, Raw water for PDAM, Flotation processes, Sludge dewatering

COMBINATION OF FLOCCULANT & COAGULANT

• Inorganic wastewater: Anionic Flocculant A6025 + Inorganic Coagulant KP35AC

• Organic wastewater: Inorganic Coagulant KP35AC + Cationic Flocculant C6660

Use inorganic coagulant KP35AC in the initial process before adding flocculant to neutralize colloidal particle charges (coagulation), so they can clump together. Then, use flocculant to help form larger flocs (aggregation of fine particles) after the coagulation process.