AQUARIGHT OSD 070 Oil Spill Dispersant

AQUARIGHT OSD 070

OIL CONTAMINATION REMOVER

SPECIFICATION

Appearance : Yellowish
Specific Gravity : 0.74 – 0.90
pH : 5 – 6

FUNCTION

To handle and remove oil spills, contamination, and oil waste on water surfaces such as rivers, lakes, seas, waterways, drainage systems, and other surfaces.

AQUARIGHT OSD 070

AQUARIGHT OSD 070 is an oil dispersant containing solvent and surface active agents.

AQUARIGHT OSD 070 is useful for removing and cleaning oil spills including crude oil and white spirit.

AQUARIGHT OSD 070 is generally used to remove kerosene, gas oil, residual oil spilled in ports, sea, water ways or off shore drilling platforms.

PROCEDURES FOR USE AND DOSAGE

Before using AQUARIGHT OSD 070 it is recommended to localize the oil spill with an oil boom. If the oil layer is thick enough, use oil absorbent powder for soaking or skimming.

Then pour AQUARIGHT OSD 070 oil spill with a Hand Spray Gun or Oil Spraying Boom which is connected to a pollution control vessel, make sure OSD 070 spreads evenly throughout the spill surface.
oil to get maximum results.

Typical dosages for use are as follows:

• 3% - 10% for cleaning tanks.

• 50 - 100 liters per 1000 liters of light hydrocarbons such as

• kerosene, white spirit and light crude oil.

• 200 liters per 1000 liters of heavy hydrocarbon such as oil

• residues and oxidized crude oil.

BENEFIT

Converts the hydrocarbon liquid into an emulsion, into particles that are so small that the decomposing bacteria can easily be converted. Friendly to the environment.